Organic and Inorganic Chemistry Lesson of the Day – Conformational Isomers (or Conformers)

Conformational isomerism is a special type of stereoisomerism that arises from the rotation of a single bond.  Specifically, 2 molecules are conformational isomers (or conformers) if they can be interconverted exclusively by the rotation of a single bond.  This type of isomerism differs from configurational stereoisomerism, whose isomers can only be interconverted by breaking certain bonds and reattaching* them to produce different 3-dimensional orientations.  Examples of configurational isomers include enantiomers, diastereomers, cis/trans isomers and meso isomers.

Different conformers are notable for having different stabilities, depending on the electrostatic interactions between the substituents along the single bond of interest.  I will talk about these differences in greater depth in future Chemistry Lessons of the Day.

*Such reattachment of the bonds must not result in different connectivities (or sequence of bonds); otherwise, that would result in structural isomers.

Advertisements

Organic and Inorganic Chemistry Lesson of the Day – Stereoisomers

Two molecules are stereoisomers if they

  • have the same molecular formula
  • have the same sequence of bonds between each molecule’s constituent atoms
  • have different 3-dimensional (spatial or geometric) orientations of the constituent atoms

Examples of stereoisomers include

It is important to emphasize that stereoisomers are defined for 2 or more molecules.  Consider 3 isomers, A, B and C.

  • A and B may be stereoisomers.
  • A and C may not be stereoisomers.  They may be structural isomers, which have the same atoms but different sequences of bonds.

Organic and Inorganic Chemistry Lesson of the Day – Optical Rotation is a Bulk Property

It is important to note that optical rotation is usually discussed as a bulk property, because it’s usually measured as a bulk property by a polarimeter.  Any individual enantiomeric molecule can almost certainly rotate linearly polarized light.  However, in a bulk sample of a chiral substance, there is usually another molecule that can rotate light in the opposite direction.  This is due to the uniform distribution of the stereochemistry of a random sample of the molecules of one compound.  (In other words, the substance consists of different stereoisomers of one compound, and the proportions of the different stereoisomers are roughly equal.)  Because one molecule’s rotation of the light can be cancelled by another molecule’s optical rotation in the opposite direction, such a random sample of the compound would have no net optical rotation.  This type of cancellation will definitely occur in a racemic mixture.  However, if a substance is enantiomerically pure, then all of the molecules in that substance will rotate linearly polarized light in the same direction – this substance is optically active.

Organic and Inorganic Chemistry Lesson of the Day – DO NOT USE THE PREFIXES (d-) and (l-) TO CLASSIFY ENANTIOMERS

In a recent Chemistry Lesson of the Day, I introduced the concept of optical rotation, and I mentioned the use of (+) and (-) to denote dextrorotary and levorotary compounds, respectively.

Some people use d- and l- instead of (+) and (-), respectively.  I strongly discourage this, because there is an old system of classifying stereogenic centres that uses the prefixes D- and L-, and the obvious similarity between the prefixes of the 2 systems causes much confusion.

This old system classifies stereogenic centres based on the similarities of their configurations to the 2 enantiomers of glyceraldehyde.  It is confusing, non-intuitive, and outdated, so I will not discuss its rationale or details on my blog.  (If you are interested, here is a good explanation from the University of Maine’s chemistry department.)

Also, note that D- and L- classify stereogenic centres, whereas d- and l- classify enantiomers – this just adds more confusion.

In short,

  • DO NOT use d- and l- to classify enantiomers; use (+) and (-) instead.
  • DO NOT use D- and L- to classify stereogenic centres; use the Cahn-Ingold-Prelog priority rules (R/S) instead.

Organic and Inorganic Chemistry Lesson of the Day – Optical Rotation (a.k.a. Optical Activity)

A substance consisting of a chiral compound can rotate linearly polarized light – this property is known as optical rotation (more commonly called optical activity).  The direction in which the light is rotated is one way to distinguish between a pair of enantiomers, as they rotate linearly polarized light in opposite directions.

Imagine if you are an enantiomer, and linearly polarized light approaches you.

  • If the light is rotated clockwise from your perspective, then you are a dextrorotary enantiomer.
  • Otherwise, if the light is rotated counterclockwise from your perspective, then you are a levorotary enantiomer.

In a previous Chemistry Lesson of the Day, I introduced the concept of diastereomers, and I used threose as an example.  Let’s use threose to illustrate some notation about optical activity.

D-threose.svg 2

(-)-Threose

  • Levorotary compounds are denoted by the prefix (-), followed by a hyphen, then followed by the name of the compound.  The above molecule is (-)-threose.
  • Dextrorotary compounds are denoted by the prefix (+), followed by a hyphen, then followed by the name of the compound.  The enantiomer of (-)-threose is (+)-threose.

A compound’s optical rotation is determined by a polarimeter.

I strongly discourage the use of the prefixes (d)- and (l-) to distinguish between enantiomers.  Use (+) and (-) instead.

Beware of the difference between designating enantiomers as (+) or (-) and designating stereogenic centres as either (R) or (S).

It is important to note that optical rotation is usually referred to as a bulk property.

Organic and Inorganic Chemistry Lesson of the Day – Cis/Trans Isomers Are Diastereomers

Recall that the definition of diastereomers is simply 2 molecules that are NOT enantiomers.  Diastereomers often have at least 2 stereogenic centres, and my previous lesson showed an example of how such diastereomers can arise.

However, while an enantiomer must have at least 1 stereogenic centre, there is nothing in the definition of a diastereomer that requires it to have any stereogenic centres.  In fact, a diastereomer does not have to be chiral.  A pair of cis/trans isomers are also diastereomers.  Recall the example of trans-1,2-dibromoethylene and cis-1,2-dibromoethylene:

dibromoethylene

 

Image courtesy of Roland1952 on Wikimedia.

These 2 molecules are stereoisomers – they have the same atoms and sequence/connectivity of bonds, but they differ in their spatial orientations.  They are NOT mirror images of each other, let alone non-superimposable mirror images.  Thus, by definition, they are diastereomers, even though they are not chiral.

Organic and Inorganic Chemistry Lesson of the Day – Racemic Mixtures

A racemic mixture is a mixture that contains equal amounts of both enantiomers of a chiral molecule.  (By amount, I mean the usual unit of quantity in chemistry – the mole.  Of course, since enantiomers are isomers, their molar masses are equal, so a racemic mixture would contain equal masses of both enantiomers, too.)

In synthesizing enantiomers, if a set of reactants combine to form a racemic mixture, then the reactants are called non-stereoselective or non-stereospecific.

in 1895, Otto Wallach proposed that a racemic crystal is more dense than a crystal with purely one of the enantiomers; this is known as Wallach’s rule.  Brock et al. (1991) substantiated this with crystallograhpic data.

 

Reference:

Brock, C. P., Schweizer, W. B., & Dunitz, J. D. (1991). On the validity of Wallach’s rule: on the density and stability of racemic crystals compared with their chiral counterparts. Journal of the American Chemical Society, 113(26), 9811-9820.

Organic and Inorganic Chemistry Lesson of the Day – Diastereomers

I previously introduced the concept of chirality and how it is a property of any molecule with only 1 stereogenic centre.  (A molecule with n stereogenic centres may or may not be chiral, depending on its stereochemistry.)  I also defined 2 stereoisomers as enantiomers if they are non-superimposable mirror images of each other.  (Recall that chirality in inorganic chemistry can arise in 2 different ways.)

It is possible for 2 stereoisomers to NOT be enantiomers; in fact, such stereoisomers are called diastereomers.  Yes, I recognize that defining something as the negation of something else is unusual.  If you have learned set theory or probability (as I did in my mathematical statistics classes) then consider the set of all pairs of the stereoisomers of one compound – this is the sample space.  The enantiomers form a set within this sample space, and the diastereomers are the complement of the enantiomers.

It is important to note that, while diastereomers are not mirror images of each other, they are still non-superimposable.  Diastereomers often (but not always) arise from stereoisomers with 2 or more stereogenic centres; here is an example of how they can arise.  (A pair of cis/trans-isomers are also diastereomers, despite not having any stereogenic centres.)

1) Consider a stereoisomer with 2 tetrahedral stereogenic centres and no meso isomers*.  This isomer has 2^{n = 2} stereoisomers, where n = 2 denotes the number of stereogenic centres.

2) Find one pair of enantiomers based on one of the stereogenic centres.

3) Find the other pair enantiomers based on the other stereogenic centre.

4) Take any one molecule from Step #2 and any one molecule from Step #3.  These cannot be mirror images of each other.  (One molecule cannot have 2 different mirror images of itself.)  These 2 molecules are diastereomers.

Think back to my above description of enantiomers as a proper subset within the sample space of the pairs of one set of stereoisomers.  You can now see why I emphasized that the sample space consists of pairs, since multiple different pairs of stereoisomers can form enantiomers.  In my example above, Steps #2 and #3 produced 2 subsets of enantiomers.  It should be clear by now that enantiomers and diastereomers are defined as pairs.  To further illustrate this point,

a) call the 2 molecules in Step#2 A and B.

b) call the 2 molecules in Step #3 C and D.

A and B are enantiomers.  A and C are diastereomers.  Thus, it is entirely possible for one molecule to be an enantiomer with a second molecule and a diastereomer with a third molecule.

Here is an example of 2 diastereomers.  Notice that they have the same chemical formula but different 3-dimensional orientations – i.e. they are stereoisomers.  These stereoisomers are not mirror images of each other, but they are non-superimposable – i.e. they are diastereomers.

D-threose.svg 2

(-)-Threose

D-erythrose 2.svg

(-)-Erythrose

 

 

 

 

 

 

Images courtesy of Popnose, DMacks and Edgar181 on Wikimedia.  For brevity, I direct you to the Wikipedia entry for diastereomers showing these 4 images in one panel.

In a later Chemistry Lesson of the Day on optical rotation (a.k.a. optical activity), I will explain what the (-) symbol means in the names of those 2 diastereomers.

*I will discuss meso isomers in a separate lesson.

Organic and Inorganic Chemistry Lesson of the Day – Stereogenic Centre

A stereogenic centre (often called a stereocentre) is an atom that satisfies 2 conditions:

  1. it is bonded to at least 3 substituents.
  2. interchanging any 2 of the substituents would result in a stereoisomer.

If a molecule has only 1 stereogenic centre, then it definitely has a non-superimposable mirror image (i.e. this molecule is chiral and is an enantiomer).  However, depending on its stereochemistry, it is possible for a molecule with 2 or more stereogenic centres to be achiral; such molecules are called meso isomers (or meso compounds), and I will discuss them in a later lesson.

In organic chemistry, the stereogenic centre is usually a carbon atom that is attached to 4 substituents in a tetrahedral geometry.  In inorganic chemistry, the stereogenic centre is usually the metal centre of a coordination complex.

In organic chemistry, stereogenic centres with substituents in a tetrahedral geometry are common.  Inorganic coordination complexes can also have a tetrahedral geometry.  A stereoisomer with n tetrahedral stereogenic centres can have at most 2^n stereoisomers.  The “at most” caveat is important; as mentioned above, it is possible for a molecule with 2 or more stereogenic centres to have a spatial arrangement that results in having a superimposable mirror image; such isomers are meso isomers.   I will discuss meso isomers in more detail in a later lesson.

 

Inorganic Chemistry Lesson of the Day – 2 Different Ways for Chirality to Arise in Coordination Complexes

In a previous Chemistry Lesson of the Day, I introduced chirality and enantiomers in organic chemistry; recall that chirality in organic chemistry often arises from an asymmetric carbon that is attached to 4 different substituents.  Chirality is also observed in coordination complexes in inorganic chemistry.  There are 2 ways for chirality to be observed in coordination complexes:

1.   The metal centre has an asymmetric arrangement of ligands around it.

  • This type of chirality can be observed in octahedral complexes and tetrahedral complexes, but not square planar complexes.  (Recall that square planar complexes have a plane formed by the metal and its 4 ligands.  This plane can serve as a plane of reflection, and any mirror image of a square planar complex across this plane is clearly superimposable onto itself, so it cannot have chirality just by having 4 different ligands alone.)

2.   The metal centre has a chiral ligand (i.e. the ligand itself has a non-superimposable mirror image).

  • Following the sub-bullet under Point #1, a square planar complex can be chiral if it has a chiral ligand.

 

Organic and Inorganic Chemistry Lesson of the Day – Chirality and Enantiomers

In chemistry, chirality is a property of a molecule such that the molecule has a non-superimposable mirror image.  In other words, a molecule is chiral if, upon reflection by any plane, it cannot be superimposed onto itself.

Chirality is a property of the 3-dimensional orientation of a molecule, and molecules exhibiting chirality are stereoisomers.  Specifically, two molecules are enantiomers of each other if they are non-superimposable mirror images of each other.  In organic chemistry, chirality commonly arises out of an asymmetric carbon atom, which is a carbon that is attached to 4 different substituents.  Chirality in inorganic chemistry is more complicated, and I will discuss this in a later lesson.

It is important to note that enantiomers are defined as pairs.  This will be later emphasized in the lesson on diastereomers.